Get ExpressVPN your Mac.
Behöver du ett VPN till Mac?
Skaffa ExpressVPN nu
Refer a friend to use ExpressVPN.
Älskar du ExpressVPN? Vill du ha en månad gratis?
Bjud in en vän nu

This tutorial will show you how to share your VPN connection from a Mac computer with the L2TP/IPsec manual configuration.

It is not possible to connect to the VPN through the app and the manual configuration at the same time, so make sure your app is disconnected from the VPN before you start.

In order to share your Mac’s VPN connection over Wi-Fi, your Mac must be connected to the internet with an ethernet cable.

Note: If your MacBook model does not have an ethernet port, use an ethernet adapter for your wired connection.

Jump to…

1. Find your ExpressVPN account credentials
2. Set up the L2TP/IPsec VPN configuration
3. Configure your L2TP/IPsec VPN
4. Connect to your L2TP/IPsec VPN
5. Set up your VPN connection for sharing
6. Share your VPN connection
Stop sharing your VPN connection
Disconnect from your L2TP/IPsec VPN connection


1. Find your ExpressVPN account credentials

To share a VPN connection from your Mac computer, you will first need to obtain your ExpressVPN credentials for the VPN setup.

Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and click Sign In.

Enter your account credentials, then click "Sign In."

Enter the verification code that is sent to your email.

On the right, select PPTP & L2TP/IPsec.

Click "PPTP & L2TP/IPsec."

This will show you your username, password, and a list of server addresses around the world.

This will show you your username, password, and a list of server addresses around the world.

Keep this browser window open. You will need this information for the setup later.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


2. Set up an L2TP/IPsec VPN on your Mac

Important: L2TP/IPsec provides weak security benefits and should only be used for anonymization or for changing locations.

Click the Apple logo in the top-left corner of your screen. Select System Preferences… > Network.

Click “Network” in System Preferences.

In the Network window, click the plus (+) sign. In the pop-up window, enter the following details:

  • Interface: Select VPN.
  • VPN Type: Select L2TP over IPsec.
  • Service Name: Enter any name that will help you recognize your VPN connection. It might be helpful to enter the location name (e.g., ExpressVPN LA).

Click “Create” to create a VPN connection.

Then click Create.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


3. Configure your L2TP/IPsec VPN

In the Network window, enter the following details:

Check the box next to Show VPN status in menu bar to see your VPN connection status in the menu bar.

Next, click Authentication Settings… Enter the following information:

  • Password: Enter the password you found earlier.
  • Shared secret: Enter 12345678.

Enter your password and shared secret.

Click OK.

Then click Advanced…

Check the box for Send all traffic over VPN connection, then click OK.

Check the box for “Send all traffic over VPN connection.”

Click Apply to save all of your settings.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


4. Connect to your L2TP/IPsec VPN

In the Network window, click Connect to start your VPN connection.

Click “Connect.”

When you have connected successfully to the VPN, you will see the word “Connected” under the name of your connection.

Your VPN connection is activated successfully.

You are now connected to ExpressVPN.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


5. Set up your VPN connection for sharing

Return to the System Preferences menu. Click Sharing.

Select Internet Sharing from the left panel.

Select "Internet Sharing" from the left panel.

The Internet Sharing options will appear on the right side of the screen. Set the following settings:

  • Share your connection from: Select the L2TP/IPsec VPN connection you just created.
  • To computers using: Check the box for Wi-Fi.

Then click Wi-Fi Options… Enter the following details:

  • Network Name: Create a network name.
  • Channel: Leave as default.
  • Security: Select WPA2 Personal.
  • Password: Create a password.

Click OK.

Anyone who wishes to connect to your VPN connection will need the password you just created.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


5. Share your VPN connection

In the Sharing window, check the box next to Internet Sharing.

If your Wi-Fi is off, you will be prompted to turn on Wi-Fi. Click Turn Wi-Fi On.

You will be prompted to turn on internet sharing. Click Start.

A green dot will appear next to the text: “Internet Sharing: On.”

The Internet Sharing is on.

In your menu bar, there are two new icons.

The following icon shows that you are connected to the ExpressVPN server: :

The menu bar icon shows that you are connected to the ExpressVPN server.

The following icon shows that you are sharing your VPN connection:

The menu bar icon shows that you are sharing your VPN connection.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


Stop sharing your VPN connection

To stop sharing your VPN connection, return to System Preferences > Sharing.

Uncheck the box for Internet Sharing.

Uncheck the box for Internet Sharing.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


Disconnect from your L2TP/IPsec VPN connection

To disconnect from your L2TP/IPsec VPN connection, go to System Preferences > Network.

Select the name of your L2TP/IPsec VPN connection on the left. Then click Disconnect.

Click “Disconnect.”

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

Var artikeln till hjälp?

Vad tråkigt att höra. Berätta gärna för oss vad vi kan göra bättre.

What device do you need help with?

Examples: Android, Windows, Linksys router

Någon från supportteamet tittar närmare på ditt ärende.