สำหรับการใช้งานแอปของเราและการตั้งค่า โปรด ลงชื่อเข้าใช้บัญชี ExpressVPN ก่อน

This tutorial will show you how to set up a VPN on your Synology using L2TP/IPsec. Before setting up ExpressVPN for your Synology, you will need to set up your Synology and turn off IPv6.

Important:

  • L2TP/IPsec provides weak security benefits.
  • It should only be used for anonymization or for changing locations.
Important:

  1. L2TP/IPsec provides weak security benefits.
  2. It should only be used for anonymization or for changing locations.

Jump to…

1. Find your ExpressVPN account credentials
2. Turn off IPv6 on your Synology
3. Create a new VPN profile
4. Connect to a VPN server location
Disconnect from a VPN server location


1. Find your ExpressVPN account credentials

Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and click Sign In.

Enter your account credentials, then click "Sign In."

Enter the verification code that is sent to your email.

On the right, select PPTP & L2TP/IPsec.

Click "PPTP & L2TP/IPsec."

This will show you your username, password, and a list of server addresses around the world.

This will show you your username, password, and a list of server addresses around the world.

Keep this browser window open. You will need this information for the setup later.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


2. Turn off IPv6 on your Synology

Turning off IPv6 helps prevent IPv6 traffic from leaking outside of the VPN tunnel.

To turn off IPv6, go to Control Panel > Network.

Go to “Control Panel” and select “Network.”

Click Network Interface > LAN. Click Edit.

Click “LAN”, then click “Edit.”

In the Edit menu, click IPv6. For IPv6 setup, select Off.

Click OK. Next, reboot your Synology.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


3. Create a new VPN profile

To add a new VPN profile, go to Control Panel > Network > Network Interface.

Click Create > Create VPN Profile.

Click “Create VPN profile.”

On the VPN Connection Method screen, select L2TP/IPsec.

Select “L2TP/IPSec.”

Click Next.

On the General Settings screen, enter the following:

  • Profile name: Enter a name that will help you recognize your VPN connection. For example: ExpressVPN_NY.
  • Server address: Enter the server address you found earlier.
  • User name: Enter the username you found earlier.
  • Password: Enter the password you found earlier.
  • Pre-shared key: Enter 12345678.

Click Next.

Select "Next."

On the Advanced Settings screen, select the following:

  • Authentication: Select MS CHAP v2.

Check the boxes for the following options:

  • Use default gateway on remote network
  • Server is behind NAT device
  • Reconnect when the VPN connection is lost

Click Apply.

Click “Apply.”

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


4. Connect to a VPN server location

You will now see your new VPN profile in the Network Interface window. Select the new VPN Profile you created, then click Connect.

Click "Connect."

When the VPN is connected, you will see the word “Connected” under your profile name.

When your ExpressVPN is connected, you will see the word “Connected.”

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


Disconnect from a VPN server location

To disconnect from the VPN server, go to Control Panel > Network > Network Interface. Click the VPN profile, then click Disconnect.

Click "Disconnect."

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

บทความนี้มีประโยชน์หรือไม่?

เราเสียใจที่ได้ยินเรื่องนี้ โปรดบอกให้เราทราบว่าควรปรับปรุงอย่างไร

What device do you need help with?

Examples: Android, Windows, Linksys router

เจ้าหน้าที่ฝ่ายสนับสนุนของเราจะติดต่อกลับเพื่อช่วยแก้ปัญหาของคุณ